_________ LabSpion, BaseSpion and LightSpion _________

Mainboard 2.65
Date: 24-09-2024 11:17 Build: 6484
VMS01 - 02_65 Beta NoForce 20240924111707 6484.firm
New communication protocol now also implemented for base mainboard to ensure smooth reconnection when USB is plugged and unplugged only when using Light Inspector v7.0 or newer. Supports LightSpion with new sensor board. Updated extender detection on LightSpion with sensor board. Supports VMS02 with power chip auto upload. Added delay for VM02 power firm upload. Power supply check in comnode. Power indicator control VM02

Mainboard 2.62
Date: 12-08-2024 14:41 Build: 6453
VMS01 - 02_62 Beta NoForce 20240812144123 6453.firm
New communication protocol now also implemented for base mainboard to ensure smooth reconnection when USB is plugged and unplugged only when using Light Inspector v7.0 or newer. Supports LightSpion with new sensor board. Updated extender detection on LightSpion with sensor board. Supports VMS02 with power chip auto upload.

Mainboard 2.61
Date: 17-01-2024 12:39 Build: 6401
VMS01 - 02_61 Beta NoForce 20240117123931 6401.firm
New communication protocol now also implemented for base mainboard to ensure smooth reconnection when USB is plugged and unplugged only when using Light Inspector v7.0 or newer. Supports LightSpion with new sensor board. Supports VMS02.

Mainboard 2.58
Date: 11-05-2023 19:38 Build: 6223
VMS01 - 02_58 Beta NoForce 20230511193804 6223.firm
New communication protocol now also implemented for Mainboard to ensure smooth reconnection when USB is plugged and unplugged. Fix: So it still works with ealier Light Inspector versions

Mainboard 2.57
Date: 08-05-2023 10:43 Build: 6219
VMS01 - 02_57 Beta NoForce 20230508104335 6219.firm
New communication protocol now also implemented for Mainboard to ensure smooth reconnection when USB is plugged and unplugged.

Mainboard 2.56
Date: 31-01-2023 16:23 Build: 6176
VMS01 - 02_56 Beta NoForce 20230131162316 6176.firm
Support for sensor sync via LabAnalyzer. More communication features.

Mainboard 2.56
Date: 31-01-2023 16:23 Build: 6176
VMS01 - 02_56 Beta NoForce 20230131162316 6176.firm
Support for sensor sync via LabAnalyzer. More communication features.

Mainboard 2.51
Date: 28-02-2022 08:36 Build: 5974
VMS01 - 02_51 Beta NoForce 20220228083638 5974.firm
Improved connect to device timing

Mainboard 2.50
Date: 31-01-2022 06:33 Build: 5947
VMS01 - 02_50 Beta NoForce 20220131063346 5947.firm
Improved spectrometer loading.

Mainboard 2.49
Date: 16-11-2021 15:17 Build: 5945
VMS01 - 02_49 Beta NoForce 20211116151755 5945.firm
Bug fix: Auto c-plane can result system halted warning, has been fixed.

Mainboard 2.47
Date: 12-10-2021 09:31 Build: 5937
VMS01 - 02_47 Beta NoForce 20211012093157 5937.firm
Bug fix: When using software version 6.10 or higher could measurement planes be slightly shifted, this has now been fixed.

Mainboard 2.46
Date: 02-09-2021 17:35 Build: 5928
VMS01 - 02_46 Beta NoForce 20210902173529 5928.firm
Bug fix: System could sometimes detect LabTemp device and report firmware error even if no LabTemp device was connected, this has now been fixed.

Mainboard 2.45
Date: 01-02-2021 15:17 Build: 5922
VMS01 - 02_45 Beta NoForce 20210201151754 5922.firm
Supporting new communication standard with enhanced error correction between sensor and mainboard. Supporting new UV-VIS sensor and LabRail communication standard. Added support for LabTemp. LabTemp communication update. Updated power readout method. Updated motor control.

Mainboard 2.40
Date: 25-09-2020 16:47 Build: 5772
VMS01 - 02_40 Beta NoForce 20200925164708 5772.firm
Supporting new UV-VIS sensor and LabRail communication standard.

Mainboard 2.38
Date: 03-07-2019 11:01 Build: 5340
VMS01 - 02_38 Beta NoForce 20190703110114 5340.firm
Minor bug fix when using swap motor function on BaseSpion

Mainboard 2.36
Date: 12-06-2018 11:10 Build: 5295
VMS01 - 02_36 Beta NoForce 20180612111047 5295.firm
New power analyzer firmware v1.28 fixing failed power on/off reading sometimes at startup.

Mainboard 2.35
Date: 07-06-2018 09:44 Build: 5293
VMS01 - 02_35 Beta NoForce 20180607094446 5293.firm
New power analyzer firmware v1.27 with higher accuracy is now also supported on LightSpion, must be used with Light Inspector v5.46 or later.

Mainboard 2.34
Date: 04-06-2018 16:03 Build: 5286
VMS01 - 02_34 Beta NoForce 20180604160322 5286.firm
Power analyzer v1.27. Sample rate updated from 70K to 355K samples per second to increase power measurement accuracy. Power measurement now also performed during warmup, only supported Light Inspector 5.45 and newer.

Mainboard 2.33
Date: 13-03-2018 14:21 Build: 5283
VMS01 - 02_33 Beta NoForce 20180313142145 5283.firm
Reset of CPU when unplugging USB and closing software (only Light Inspector 5.36 and newer). Supports Realtime tracking.

Mainboard 2.32
Date: 21-02-2017 11:20 Build: 5158
VMS01 - 02_32 Beta NoForce 20170221112032 5158.firm
Power analyzer version 1.26 fixing issue with lamp not always turning off.

Mainboard 2.31
Date: 09-09-2016 17:18 Build: 5155
VMS01 - 02_31 Beta NoForce 20160909171800 5155.firm
Power analyser update v1.25: Soft lamp off preventing high current spikes when lamp is an inductive load and turned off. High current spikes can result in USB disconnecting.

Mainboard 2.30
Date: 20-05-2016 15:51 Build: 5152
VMS01 - 02_30 Beta NoForce 20160520155116 5152.firm
First version supporting BaseSpion. Power analyser updated: Systems using releay power switch will always turn on even if lamp has high in-rush current

Mainboard 2.27
Date: 19-02-2016 12:48 Build: 5132
VMS01 - 02_27 Beta NoForce 20160219124816 5132.firm
Power analyzer firmware updated to improve sensitivity of power analyzer.

Mainboard 2.26
Date: 11-02-2016 16:02 Build: 5129
VMS01 - 02_26 Beta NoForce 20160211160242 5129.firm
Motor voltage can be checked, giving warning if mains power is not plugged in.

Mainboard 2.24
Date: 22-07-2015 21:15 Build: 5082
VMS01 - 02_24 Beta NoForce 20150722211551 5082.firm
Support for LabSpion base lock detection

Mainboard 2.23
Date: 27-05-2015 15:05 Build: 5072
VMS01 - 02_23 Beta NoForce 20150527150543 5072.firm
Lamp stays on when USB unplugged. Offset correction smoother power on. More stable power measurement v1.21. Double relay power on even at high start current.

Mainboard 2.21
Date: 13-05-2015 17:43 Build: 5070
VMS01 - 02_21 Beta NoForce 20150513174339 5070.firm
Lamp stays on when USB unplugged. More stable power measurement v1.21. Double relay power on even at high start current. Smoother power sample.

Mainboard 2.20
Date: 01-04-2015 10:03 Build: 5055
VMS01 - 02_20 Beta NoForce 20150401100348 5055.firm
More stable power measurement v1.20. Double relay support. Smoother power sample.

Mainboard 2.19
Date: 19-03-2015 14:17 Build: 5052
VMS01 - 02_19 Beta NoForce 20150319141734 5052.firm
More stable power measurement v1.19. Double relay support. Smoother power sample.

Mainboard 2.25
Date: 01-01-2015 00:00 Build: 5113
VMS01 - 02_25 Beta NoForce 20159925152846 5113.firm
First version with cone speed to support high res measurment of narrow beam angles at multiple c-planes

Mainboard 2.16
Date: 09-09-2014 18:34 Build: 5039
VMS01 - 02_16 Beta NoForce 20140909183404 5039.firm
Power relay support, smoother power sample. Motor contol bug fixed. Supprts new PCB. Auto power off at unplug and reset.

Mainboard 2.14
Date: 23-06-2014 18:38 Build: 5035
VMS01 - 02_14 Beta NoForce 20140623183814 5035.firm
Motor contol bug fixed. Supprts new PCB. Auto power off at unplug and reset. Minor Status read bug fixed. Remote VersaPic support. 2 motor driver. 2048 pixel support. Read motor type information

Mainboard 2.11
Date: 10-06-2014 16:14 Build: 5012
VMS01 - 02_11 Beta NoForce 20140610161447 5012.firm
Supprts new PCB. Auto power off at unplug and reset. Minor Status read bug fixed. Remote VersaPic support. 2 motor driver. 2048 pixel support. Read motor type information


_________ LabSensor, LabSensor M2 and BaseSensor _________

LabSensor 3.51
Date: 23-03-2023 20:45 Build: 6671
LABSEN1 - 03_51 Beta NoForce 20230323204514 6671.firm
Spectrum time stamps for LabCam. Fixes to sensor display and distance measurement sound and control

LabSensor 3.46
Date: 17-02-2022 07:26 Build: 6552
LABSEN1 - 03_46 Beta NoForce 20220217072649 6552.firm
New firmware 1.22 for BaseSpion position detection board to improve position detection. Position detection must be re-calibrated for improvement to come into effect. Added special internal byte delay firmware upload method.

LabSensor 3.45
Date: 15-07-2021 15:02 Build: 6551
LABSEN1 - 03_45 Beta NoForce 20210715150254 6551.firm
Bug fix: Internal setup memory offset aligned, can result in custom calibration set in older version not loading in newer Light Inspector version 6.01.1 to 6.21.

LabSensor 3.44
Date: 01-06-2021 09:20 Build: 6542
LABSEN1 - 03_44 Beta NoForce 20210601092024 6542.firm
Double bib sound added to LabSensor making it easier to know when distance measurement has been started.

LabSensor 3.43
Date: 12-03-2021 10:35 Build: 6532
LABSEN1 - 03_43 Beta NoForce 20210312103503 6532.firm
Laser load error can result in laser not working has been fixed. Version supporting new UV sensor. Supports new commode communication standard for LabRail. Supports LabSensor Model2 with display. Basespion now works with new software. New laser load direct bug fixed.

LabSensor 3.34
Date: 23-09-2019 10:36 Build: 5822
LABSEN1 - 03_34 Beta NoForce 20190923103651 5822.firm
Increased stability when laser on button is pushed on LabSensor.

LabSensor 3.33
Date: 13-08-2019 11:18 Build: 5819
LABSEN1 - 03_33 Beta NoForce 20190813111815 5819.firm
Laser distance measurement of black surface could make sensor reset, has been fixed.

LabSensor 3.32
Date: 16-11-2018 16:20 Build: 5808
LABSEN1 - 03_32 Beta NoForce 20181116162041 5808.firm
Laser distance measurement now more stable. Supporting new laser communication port. Minor bug fix for new laser port.

LabSensor 3.30
Date: 11-01-2018 11:48 Build: 5664
LABSEN1 - 03_30 Beta NoForce 20180111114809 5664.firm
Supporting new driver board for sensor. New internal sync timer functionality for more precise tracking of measurements and faster setting of integration time.

LabSensor 3.29
Date: 05-10-2017 14:18 Build: 5530
LABSEN1 - 03_29 Beta NoForce 20171005141810 5530.firm
Improved BaseTracker v1.21 sensitivity. New internal sync timer functionality for more precise tracking of measurements and faster setting of integration time.

LabSensor 3.23
Date: 20-06-2017 16:01 Build: 5371
LABSEN1 - 03_23 Beta NoForce 20170620160104 5371.firm
Includes software opdater for BaseSpion distance detector, new base distance sensor firmware 1.19 with better sensitivity. Supports new spectrometer driver boards.

LabSensor 3.22
Date: 10-11-2016 14:53 Build: 5204
LABSEN1 - 03_22 Beta NoForce 20161110145351 5204.firm
Supporting BaseSensor for BaseSpion. Sensor type detection bug fixed.

LabSensor 3.21
Date: 24-10-2016 13:00 Build: 5203
LABSEN1 - 03_21 Beta NoForce 20161024130032 5203.firm
Supporting BaseSensor for BaseSpion

LabSensor 3.18
Date: 08-02-2016 11:35 Build: 5162
LABSEN1 - 03_18 Beta NoForce 20160208113540 5162.firm
Spectrometer can now be reset from the Light Inspector software.

LabSensor 3.17
Date: 29-07-2015 21:40 Build: 5152
LABSEN1 - 03_17 Beta NoForce 20150729214043 5152.firm
Laser distance can now be measured by only pushing measure button. Fixes: More stable laser measurement, Power push and Meas push delay implemented

LabSensor 3.16
Date: 10-02-2015 16:47 Build: 5132
LABSEN1 - 03_16 Beta NoForce 20150210164711 5132.firm
Long RJ45 cable connection problem fixed. Write to EEprom fixed, Laser board power and remote control. Spectrometer bad offset power reset fixed

LabSensor 3.14
Date: 15-01-2015 17:03 Build: 5116
LABSEN1 - 03_14 Beta NoForce 20150115170312 5116.firm
Laser board power and remote control. Spectrometer bad offset power reset fixed

LabSensor 3.13
Date: 16-11-2014 16:55 Build: 5113
LABSEN1 - 03_13 Beta NoForce 20141116165552 5113.firm
Laser remote control. Spectrometer bad offset power reset fixed, First release of LabSensor firmware

LabSensor 3.12
Date: 26-08-2014 19:12 Build: 5101
LABSEN1 - 03_12 Beta NoForce 20140826191233 5101.firm
Spectrometer bad offset power reset fixed, First release of LabSensor firmware


__________________________ LabFlicker __________________________

LabFlicker 2.14
Date: 10-03-2023 14:48 Build: 0
FLICK01 - 02_14 Beta NoForce 20230310144820 0.firm
Now with updated usb communication protocol for more stable communication

LabFlicker 1.25
Date: 26-09-2018 16:58 Build: 0
FLICK01 - 01_25 Beta NoForce 20180926165815 0.firm
Supporting dynamic sample rate enabling PstLM measurements. Oversampling with filtering giving higher dynamic range and less noise.

LabFlicker 1.19
Date: 26-04-2018 13:44 Build: 0
FLICK01 - 01_19 Beta NoForce 20180426134416 0.firm
Changed sample rate to 50000Hz and the sample size has been change to fit with 1 second of measurement. Requires Light Inspector 5.37.

LabFlicker 1.18
Date: 06-12-2017 13:36 Build: 0
FLICK01 - 01_18 Beta NoForce 20171206133622 0.firm
Increase scan size to get 0.1 second total sample time.

LabFlicker 1.16
Date: 20-11-2017 16:25 Build: 0
FLICK01 - 01_16 Beta NoForce 20171120162544 0.firm
Flicker measurement second version. Including serial number readout function.

LabFlicker 1.15
Date: 03-10-2017 11:25 Build: 0
FLICK01 - 01_15 Beta NoForce 20171003112531 0.firm
Flicker measurement first version


__________________________ LabTemp __________________________

LabTemp 1.15
Date: 05-05-2022 14:06 Build: 0
LABTMP1 - 01_15 Beta NoForce 20220505140630 0.firm
Improved stability and fixed firmware halting bugs.

LabTemp 1.14
Date: 30-08-2021 11:05 Build: 0
LABTMP1 - 01_14 Beta NoForce 20210830110511 0.firm
Improved sampling cycles for increased accuracy of temperature sensors. Added device identify LED routine.


__________________________ LabPower __________________________

LabPower 1.34
Date: 06-02-2024 11:11 Build: 0
LABPWR1 - 01_34 Beta NoForce 20240206111108 0.firm
Support for up to 280 VAC on LabPower. Bug fix: Noise during power on could trigger display errors, this has now been fixed.

LabPower 1.33
Date: 12-01-2024 19:42 Build: 0
LABPWR1 - 01_33 Beta NoForce 20240112194259 0.firm
Increased USB communication speed when using sensor sync for measuring flashing lamp, this will improve stability during sensor sync measurements.

LabPower 1.32
Date: 12-01-2024 18:29 Build: 0
LABPWR1 - 01_32 Beta NoForce 20240112182952 0.firm
Bug fix: Power could fail to turn on in version 1.30 and 1.31, this has now been fixed. If remote sense was selected would it not be re-stored after power cycle, this has now been fixed.

LabPower 1.31
Date: 12-01-2024 15:02 Build: 0
LABPWR1 - 01_31 Beta NoForce 20240112150243 0.firm
Bug fix: Power streaming for sensor sync would not start in version 1.30, this has now been fixed.

LabPower 1.30
Date: 27-11-2023 13:34 Build: 0
LABPWR1 - 01_30 Beta NoForce 20231127133456 0.firm
Further improvements for auto gain adjustment for current. If auto gain changes during a power measurement, is power integration re-done ensure auto gain changes does not give incorrect power readings during the gain change.

LabPower 1.29
Date: 12-10-2023 14:48 Build: 0
LABPWR1 - 01_29 Beta NoForce 20231012144841 0.firm
Bug fix: Auto gain could make power readings jumpy as best signal to noise amplifier was not selected correctly; this has now been fixed.

LabPower 1.28
Date: 24-05-2023 11:39 Build: 0
LABPWR1 - 01_28 Beta NoForce 20230524113939 0.firm
New view with THD values for voltage and current, Bug fix: Jumping power readings, now fixed.

LabPower 1.27
Date: 09-05-2023 13:24 Build: 0
LABPWR1 - 01_27 Beta NoForce 20230509132404 0.firm
Fixed unstable power reading at inrush current spikes


__________________________ Labarazzi __________________________

Labarazzi 2.11
Date: 22-11-2024 14:25 Build: 0
LABZZI1 - 02_11 Release NoForce 20241122142512 0.firm
Added functions for loading curves via external DLL interface

Labarazzi 2.00
Date: 12-11-2021 15:52 Build: 0
LABZZI1 - 02_00 Release NoForce 20211112155254 0.firm
Minor main screen changes. WF1 and WF26 swapped place. Waveforms can now be loaded back and forth in software. Mayor signal generator update to reduce bugs. Amp scaling now works with on board generated signals. Intensity is not specified in approximate lumens

Labarazzi 1.18
Date: 07-10-2021 16:52 Build: 0
LABZZI1 - 01_18 Beta NoForce 20211007165251 0.firm
Added PstLM 1 SVM 1 WF26. Running 5% intensity change and flash block Read write enabled

Labarazzi 1.16
Date: 05-10-2021 16:49 Build: 0
LABZZI1 - 01_16 Beta NoForce 20211005164950 0.firm
Live Intensity Change

Labarazzi 1.15
Date: 24-09-2021 15:54 Build: 0
LABZZI1 - 01_15 Beta NoForce 20210924155440 0.firm
Improved USB communication under startup.

Labarazzi 1.14
Date: 17-09-2021 16:55 Build: 0
LABZZI1 - 01_14 Beta NoForce 20210917165528 0.firm
Second version of Labarazzi firmware. Now with MD signal generator and waveform USB transfer

Labarazzi 1.14
Date: 17-09-2021 16:55 Build: 0
LABZZI1 - 01_14 Beta NoForce 20210917165528 0.firm
Second version of Labarazzi firmware. Now with MD signal generator and waveform USB transfer

Labarazzi 1.12
Date: 16-08-2021 14:10 Build: 0
LABZZI1 - 01_12 Beta NoForce 20210816141042 0.firm
First version of Labarazzi firmware.


__________________________ LabAnalyzer __________________________

LabAnalyzer 1.36
Date: 18-10-2024 09:36 Build: 0
LABANA1 - 01_36 Beta NoForce 20241018093618 0.firm
Support for up to 280 VAC on LabPower. Bug fix: Noise during power on could trigger display errors, this has now been fixed. Added more factory test function.

LabAnalyzer 1.35
Date: 17-10-2024 17:15 Build: 0
LABANA1 - 01_35 Beta NoForce 20241017171508 0.firm
Support for up to 280 VAC on LabPower. Bug fix: Noise during power on could trigger display errors, this has now been fixed. Added factory test function.

LabAnalyzer 1.33
Date: 12-01-2024 19:42 Build: 0
LABANA1 - 01_33 Beta NoForce 20240112194259 0.firm
Increased USB communication speed when using sensor sync for measuring flashing lamp, this will improve stability during sensor sync measurements.

LabAnalyzer 1.32
Date: 12-01-2024 18:29 Build: 0
LABANA1 - 01_32 Beta NoForce 20240112182952 0.firm
Bug fix: Power could fail to turn on in version 1.30 and 1.31, this has now been fixed. If remote sense was selected would it not be re-stored after power cycle, this has now been fixed.

LabAnalyzer 1.31
Date: 12-01-2024 15:02 Build: 0
LABANA1 - 01_31 Beta NoForce 20240112150243 0.firm
Bug fix: Power streaming for sensor sync would not start in version 1.30, this has now been fixed.

LabAnalyzer 1.30
Date: 27-11-2023 13:34 Build: 0
LABANA1 - 01_30 Beta NoForce 20231127133456 0.firm
Further improvements for auto gain adjustment for current. If auto gain changes during a power measurement, is power integration re-done ensure auto gain changes does not give incorrect power readings during the gain change.

LabAnalyzer 1.29
Date: 12-10-2023 14:48 Build: 0
LABANA1 - 01_29 Beta NoForce 20231012144841 0.firm
Bug fix: Auto gain could make power readings jumpy as best signal to noise amplifier was not selected correctly; this has now been fixed.

LabAnalyzer 1.28
Date: 24-05-2023 11:41 Build: 0
LABANA1 - 01_28 Beta NoForce 20230524114111 0.firm
Sensor sync now also supported AC power. New view with THD values for voltage and current, Bug fix: Jumping power readings, now fixed.

LabAnalyzer 1.23
Date: 01-02-2023 14:55 Build: 0
LABANA1 - 01_23 Beta NoForce 20230201145509 0.firm
This version now supports sensor sync


__________________________ LightInterface __________________________

LightInterface 1.14
Date: 19-07-2024 13:17 Build: 0
LABINT1 - 01_14 Beta NoForce 20240719131731 0.firm
DMX break time changed from 88us to 100us

LightInterface 1.12
Date: 03-04-2024 10:47 Build: 0
LABINT1 - 01_12 Beta NoForce 20240403104721 0.firm
LabInterface implementing RDM

LightInterface 1.00
Date: 26-01-2024 15:17 Build: 0
LABINT1 - 01_00 Beta NoForce 20240126151714 0.firm
LabInterface first firmware version


_________ LabSpion V2, BaseSpion V2 and LightSpion V2 _________

Mainboard V2 2.65
Date: 24-09-2024 11:15 Build: 6483
VMS02 - 02_65 Beta NoForce 20240924111519 6483.firm
New communication protocol now also implemented for base mainboard to ensure smooth reconnection when USB is plugged and unplugged only when using Light Inspector v7.0 or newer. Supports LightSpion with new sensor board. Updated extender detection on LightSpion with sensor board. Supports VMS02 with power chip auto upload. Added delay for VM02 power firm upload. Power supply check in comnode. Power indicator control VM02

Mainboard V2 2.63
Date: 19-08-2024 13:40 Build: 6469
VMS02 - 02_63 Beta NoForce 20240819134045 6469.firm
New communication protocol now also implemented for base mainboard to ensure smooth reconnection when USB is plugged and unplugged only when using Light Inspector v7.0 or newer. Supports LightSpion with new sensor board. Updated extender detection on LightSpion with sensor board. Supports VMS02 with power chip auto upload. Added delay for VM02 power firm upload.

Mainboard V2 2.62
Date: 12-08-2024 14:44 Build: 6454
VMS02 - 02_62 Beta NoForce 20240812144423 6454.firm
New communication protocol now also implemented for base mainboard to ensure smooth reconnection when USB is plugged and unplugged only when using Light Inspector v7.0 or newer. Supports LightSpion with new sensor board. Updated extender detection on LightSpion with sensor board. Supports VMS02 with power chip auto upload.